Hitachi DZ-BD10HA User Manual
Page 91
91
Ad
di
ti
on
al I
n
fo
rm
a
tio
n
Disc almost full.
The remaining free space of the disc is less than one
minute for video. Delete unwanted scenes, or use another
disc.
66
Disc error has
occurred.
• Format the disc before using the camcorder. Formatting
the disc will delete all data recorded on it.
• The disc may be dirty. Remove the disc and wipe off
fingerprints, dust, etc.
• See *3 and *4 on p.96.
71
Disc error has
occurred. Stop
dubbing. Turn off
power, then turn on
again.
• Disc error occurred during finalizing, and finalizing
failed. Replace the disc.
• See *3 on p.96.
77
Disc error has
occurred. Format the
disc now?
• Was the disc formatted on a PC, or formatting
interrupted? Choose “YES” to format the disc.
Formatting the disc will erase all data on it.
• See *3 on p.95.
71
Disc error has
occurred. Keep Disc
inside & restart.
Disc error could have occurred during editing of scenes.
Turn off the camcorder with the disc inserted, and then
turn it on again. The camcorder will attempt to restore
scenes.
—
Disc error has
occurred.
Unfinalizing is not
complete.
This message will appear when a disc error occurs during
the unfinalization process. Replace the disc.
78
Disc must be
finalized before it
can be played on
another device.
• This message will appear if you remove a BD-R/DVD-
RW (VF mode)/DVD-R disc that has not been
finalized.
• See *5 on p.96.
77
Drive overheat.
Please retry later.
In this case, proper writing/reading HDD/disc may not be
possible. Turn off the power, then wait for a while.
—
Error occurred.
Please replace disc
or format disc.
• Error occurred while recovering the DVD.
• Format the DVD. Formatting the DVD will delete all
data recorded on it. If this error message persists, use
another DVD. Note that DVD-R cannot be formatted.
Use another disc.
• See *2 on p.95.
71
Failed to recover
video data.
Corrupted scenes
have been deleted
and disc is usable
again.
Error occurred while recovering BD. Although the
recovery was unsuccessful, you can continue using BD.
—
Message
Cause & Troubleshooting
Reference
page