Quickspecs, Hp proliant dl580 generation 5 storage – HP Proliant DL580 User Manual
Page 40
External Storage
Quantity
Supported
Position
Supported
Host Controller or Adapter
Modular Smart Array 20
Enclosure
1 per SCSI
VHDCI
connector
External
Smart Array 6404/256 Controller
Modular Smart Array 30
Family
Up to 28
External
Smart Array 6404/256 Controller
Modular Smart Array 50
Enclosure
Up to 26
External
HP Smart Array P600/256 BBWC Controller
HP Smart Array P800/512 BBWC Controller
HP 2000sa Modular
Smart Array Controller
Up to 4
External
HP SC08Ge Host Bus Adapter
Maximum Storage Capacity - (External SAS Enclosure Attached)
Internal
2.336TB (16 x 146GB SFF SAS Drives)
External
720TB (80 MSA60 enclosures x 12 drive bays each x 750 GB SATA Drives)
Tape and Disk-Based Backup
NOTE: For an up-to-date listing of the latest O/S Support details for each of the Tape Drives listed below, please see the
following:
(Worldwide)
NOTE: For an up-to-date listing of the latest O/S Support details for each of the Tape Autoloaders and Tape Libraries listed
below, please see the following:
(Worldwide)
NOTE: For complete listing of tape drive offerings see
NOTE: SAS Tape Drives: Connecting hard drive cage and SAS tape to the same SAS Controller using split cable (supplied
with tape drive) deactivates 1 of the hard drive bays. Actual hard drive bay deactivated depends on where split cable plugs
into SAS drive connector. Example: 3x SAS cable connector plugged into SAS drive connector (5-8) on the back of the hard
drive cage would mean drive bay 8 is deactivated.
Position
Supported
Controller
Controller Part
Number
HP StorageWorks SCSI
Tape Drives, Internal
LTO-1 Ultrium 232
LTO-2 Ultrium 448
LTO-3 Ultrium 920
LTO-4 Ultrium 1760
DAT 40
DAT 72
DAT 160
2
HP SC11Xe Host Bus Adapter
412911-B21
HP StorageWorks SCSI
Tape Drives, External
LTO-1 Ultrium 232
LTO-2 Ultrium 448
LTO-3 Ultrium 920
LTO-3 Ultrium 960
LTO-4 Ultrium 1760
External
HP SC11Xe Host Bus Adapter
412911-B21
QuickSpecs
HP ProLiant DL580 Generation 5
Storage
DA - 12770 Worldwide QuickSpecs — Version 18 — 7.18.2008
Page 40