Henny Penny BLAST CHILLER/FREEZER BCC/BCR-175 - Manual (Page 5)

Model BCC/BCR-140, BCC/BCR-175, BFR/BCR-350
This section provides troubleshooting information in the form
of an easy-to-read table.
If a problem occurs during the first operation of a cabinet,
recheck the installation per the Installation Section of the Operator’s
Manual.
Before troubleshooting, always recheck the operation procedures in
the Operator’s manual.
603 1-1
1-1. INTRODUCTION
1-3. TROUBLESHOOTING To isolate a malfunction, proceed as follows:
1. Clearly define the problem or symptom and when it occurs.
2. Locate the problem in the troubleshooting table.
3. Review all possible causes. Then, one at a time work through
the list of corrections until problem is solved.
If maintenance procedures are not followed correctly,
injuries and/or property damage could result.
1-2. SAFETY Where information is of particular importance or is safety
related, the words NOTICE, CAUTION, or WARNING are
used. Their usage is described below.
SAFETY ALERT SYMBOL is used with DANGER,
WARNING, or CAUTION which indicates a personal
injury type hazard.
NOTICE is used to highlight especially important
information.
CAUTION used without the safety alert symbol indicates
a potentially hazardous situation which, if not avoided,
may result in property damage.
CAUTION used with the safety alert symbol indicates a
potentially hazardous situation which, if not avoided,
may result in minor or moderate injury.
WARNING indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
SECTION 1. TROUBLESHOOTING