Hitachi G13SE2 - Manual (Page 16)

English
16
ACCESSORIES
WARNING:
Never use any accessories other than those mentioned below.
The use of any accessories other than those mentionded below or
attachments not intended for use such as cup wheel, cut-off wheel or
saw blade is dangerous and may cause personal injury or property
damage.
NOTE: Accessories are subject to change without any obligation on the part of the HITACHI.
STANDARD ACCESSORIES
⅜ Depressed center wheel..................................................................................................... 1
4-1/2" (115 mm) external dia.
×
1/4" (6 mm) thickness
×
7/8" (22 mm) hole dia.
(Code No. 701045 or 326203) ................ G12SE2
5" (125mm) external dia.
×
1/4” (6 mm) thickness
×
7/8” (22 mm) hole dia.
(Code No. 701050 or 326205) ................ G13SE2
⅜ Wrench (Code No. 938332Z) .............................................................................................. 1
⅜ Side Handle (Code No. 956633)......................................................................................... 1
NOTE: Specifications are subject to change without any obligation on the part of the
HITACHI