HP 512424-001 - Manual (Page 101)

4–56 Maintenance and Service Guide
Removal and replacement procedures
h. Keyboard (see “Keyboard” on page 21 )
i. Switch cover(see “Switch cover” on page 25 )
j. Speaker assembly (see “Speaker assembly” on page 27 )
k. Display assembly (see “Display assembly” on page 28 ).
l. Top cover (see “Top cover” on page 37 ).
m. System board (see “System board” on page 47 ).
n. Fan/heat sink assembly (see “Fan/heat sink assembly” on page 50 ).
Remove the processor:
1. Use a flat-bladed screwdriver to turn the processor locking screw 1 one-half turn counterclockwise until you
hear a click.
2. Lift the processor 2 straight up and remove it.
✎
When you install the processor, the gold triangle 3 on the processor must be aligned with the triangle 4
embossed on the processor socket.
Reverse this procedure to install the processor.