HP 3C590-TPO - Manual (Page 4)

1 Connecting to a Netware 3.12 Server
Windows for Workgroups
6 Remove the 3com cards driver diskette and insert Netware client for DOS
and MS-Windows disk 1.
7 Execute INSTALL.EXE and set lines 1-5 as listed below;
8 C:\NWCLIENT
9 YES
10 YES
C:\WINDOWS
11 NO
12 3COM Etherlink III Parallel Tasking Family.
13 Highlight option 6 to continue with installation.
14 When prompted, insert the corresponding disks to complete file transfer
and driver installation.
15 When the install utility is finished, press <CRTL><ALT><DEL> to restart
the machine.
16 After windows loads, open the “NETWORK” folder, double-click the
“NETWORK SETUP” icon.
17 Select “Networks”, and verify that “Novell Netware (Workstation Shell 4.0
and above)” is listed under “Install Windows support for the following
network only:” and click on “OK.”