HP PAVILLION ZD7000 - Manual (Page 30)

2–6 Maintenance and Service Guide
Troubleshooting
Device Options
(continued)
■
Change the parallel port mode from
Enhanced Parallel Port (EPP, the default
setting) to standard, bidirectional, EPP, or
Enhanced Capabilities Port (ECP).
■
Set video-out mode to NTSC (default), PAL,
NTSC-J, or PAL-M.*
■
Enable/disable all settings in the SpeedStep
window. (When Disable is selected, the
notebook runs in Battery Optimized mode.)
■
Specify how the notebook recognizes
multiple identical expansion bases that are
identically equipped. Select Disable to
recognize the expansion bases as a single
expansion base; select Enable to recognize
the expansion bases individually, by serial
number.
■
Enable/disable the reporting of the processor
serial number by the processor to the
software.
HDD Self Test Options Run a quick comprehensive self test on hard
drives in the system that support the test
features.
*Video modes vary even within regions. However, NTSC is common in North
America; PAL, in Europe, Africa, and the Middle East; NTSC-J, in Japan; and
PAL-M, in Brazil. Other South and Central American regions can use NTSC,
PAL, or PAL-M.
Table 2-3
Advanced Menu (Continued)
Select To Do This
333621-001.book Page 6 Wednesday, September 17, 2003 12:24 PM