7 faq – Honeywell HD-DVR-1016 User Manual
Page 172
FAQ
158
7 FAQ
1. DVR cannot boot up properly.
There are the following possibilities:
•
Input power is incorrect.
•
Power connection is incorrect.
•
Power switch button is damaged.
•
Program upgrade is wrong.
•
HDD malfunction or something is wrong with HDD ribbon.
•
Front panel error.
•
Main board is damaged.
2. DVR often automatically shuts down or stops running.
There are the following possibilities:
•
Input voltage is not stable or it is too low.
•
HDD malfunction or something wrong with the ribbon.
•
Button power is not enough.
•
Front video signal is not stable.
•
Working environment is too harsh, too much dust.
•
Hardware malfunction.
3. System can not detect hard disk.
There are the following possibilities:
•
HDD is broken.
•
HDD ribbon is damaged.
•
HDD cable connection is loose.
•
Main board SATA port is broken.