HONDA FG110 - Manual (Page 39)

TECHNICAL & CONSUMER INFORMATION
37
TUNEUP
CONSUMER INFORMATION
Find an Authorized Honda Servicing Dealer in Your Area
Call (800) 426-7701 or visit the Dealer Locator section of the Honda Power Equipment World Wide Web site:
www.hondapowerequipment.com/dealer
Customer Service Information
Honda Power Equipment dealership personnel are trained professionals. They should be able to answer any
question you may have. If you encounter a problem that your dealer does not solve to your satisfaction, please
discuss it with the dealership’s management. The Service Manager or General Manager can help. Almost all
problems are solved in this way.
If you are dissatisfied with the decision made by the dealership’s management, contact the Honda Power
Equipment Customer Relations Office.
You can write to:
American Honda Motor Co., Inc.
Power Equipment Division
Customer Relations Office
4900 Marconi Drive
Alpharetta, GA 30005-8847
Or telephone: (770) 497-6400
weekdays, 8:30 a.m. - 8:00 p.m. EST
TILLER
Model FG110 A
Description code FAAA
Length x width x height 40.9 x 14.5 x 39.4 in (1038 x 368 x 1000 mm)
Weight Dry With drag bar 28.6 lb (13 kg)
With wheels 30.6 lb (13.9 kg)
Wet With drag bar 29.9 lb (13.6 kg)
With wheels 31.9 lb (14.5 kg)
Drive clutch Centrifugal mechanical
Drive clutch engagement speed 4,200 ± 200 rpm
Tilling width 9 in (230 mm)
Tilling depth 8 in (203 mm)
Transmission drive Worm gear
Tine number 4 (6 teeth per tine)
Spark plug gap 0.024 ~ 0.028 in (0.6 ~ 0.7 mm) See page 21.
Idle speed 3,100 ± 200 rpm See page 23.
Valve clearance (cold) Intake 0.08 ± 0.02 mm
Exhaust 0.11 ± 0.02 mm See shop manual.
Other specifications No other adjustments needed.