HP photosmart 720 - Manual (Page 38)

38 hp photosmart 720 user’s manual
Date & time
This setting determines the current date and time for the
camera. This is usually done when you first set up the camera,
but you may need to re-set the date and time when you are
travelling to different time zones or when the batteries are out
of the camera for more than10 minutes.
1 In the Setup menu, select Date & Time .
2 Follow the same procedure used in Setting the date and
time on page 17.
Welcome screen
This setting determines the image that appears when the
camera is turned on. You can select any image available in the
camera or the HP logo, which is the default setting.
1 In Playback mode, scroll to the image you want by using
the buttons, then press OK to display the Main menu.
2 In the Main menu, select the Setup option.
3 In the Setup menu, select Welcome Screen .
4 Select This Image to use the
current image, HP Logo to return
to the factory setting, or Exit to
leave the current welcome screen
unchanged.
5 Press OK to activate the selection
you made in the previous step.