Horizon Fitness T10K - Manual (Page 11)

INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE YOU
BEGIN
TREADMILL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
10
YOU’RE FINISHED!
ASSEMBLY STEP 4
A Open HARDWARE BAG 4.
B Slide SUPPORT BARS into side
MOUNTING BRACKETS and
line up with top MOUNTING
BRACKETS.
C Insert 2 BOLTS (I) into the
tops and 2 BOLTS (I) into the
bottoms of each SUPPORT
BAR.
D Slide SUPPORT BAR BOOTS
down to cover BOLTS (I).
E Connect power plug to the
treadmill and connect the cord to
a power outlet. The on/off switch
is located next to the power
cord. Flip this switch to the ‘on’
position, so that the switch is
lit. You will hear a beep and the
console will light up.
������������
���������������
��������
�����
������
��������
HARDWARE BAG 4 CONTENTS :
�����������������
�������
����
��������
�������
���������
���������