HP DX2000 User Manual
Page 13
Service Reference Guide, dx2000 uT
359782-002
2–3
Setup Utilities and Diagnostics Features
5. Use the arrow (left and right) keys to select the appropriate heading. Use the arrow (up and
down) keys to select the option you want, then press
Enter
. To return to the Computer Setup
Utilities menu, press
Esc
.
6. To apply and save changes, select File
>
Save Changes and Exit.
❏
If you have made changes that you do not want applied, select Ignore Changes and
Exit.
❏
To reset to factory settings, select Set Defaults and Exit. This option will restore the
original factory system defaults.
Ä
CAUTION: Do NOT turn the computer power OFF while the ROM is saving your F10 Computer Setup
changes because the CMOS could become corrupted. It is safe to turn off all power to the computer
after you exit the F10 Setup screen.