Hitachi 50UX57B 60UX57B - Manual (Page 23)

23
HOW TO USE THE REMOTE TO CONTROL YOUR TV
ቭ
EXIT button
When in MENU mode, this button will exit all On-Screen Displays.
ቮ
RECALL button
Press this button when no menu is displayed when you want to check the channel being received, the picture source, if the channel
has stereo (ST) or second audio program (SAP), the time, CHANNEL ID, if the Channel Skip (C.S.) function is activated, if SPECIAL
EVENT REMINDER is set, and if the SLEEP timer is set.
ቯ
MENU, CURSOR buttons
All the On-Screen Display features can be set or adjusted by using these buttons.
The MENU button will start the On-Screen Display.
The CURSOR buttons will highlight functions or adjust and set different features.
ተ
CHANNEL SKIP button
Press this button when no menu is displayed and the TV will tune to the last channel viewed. The user can change stations “SURF”
to any station they wish, and after 90 seconds, tune back to the original channel.
ቱ
SLEEP button
Press this button to display the sleep timer in the lower left corner of the screen. Every subsequent press of this button will add
15 minutes to this timer, up to a maximum of three hours. Once set, use RECALL when you want to view time remaining. If the
SLEEP button is pressed while the timer is set, it will reset to the original condition.
ቲ
INPUT button
The INPUT button will select between both antenna signals and the three sets of video input jacks each time the button is pressed.
If the Picture-in-Picture is on, the INPUT button will select between the three sets of video input jacks and both antenna sources
when main channel is chosen with the PIP CH button. If the sub-picture is chosen, the INPUT button will select between the three
sets of video input jacks and the ANT A antenna source (ANT B source cannot be displayed as a PIP sub-picture and COMPO-
NENT: Y-CbCr Input 2 source will be displayed as a blank PIP Sub picture.)
ANT A 10
ABCD
10:00PM
PIP ANT A 12
STEREO
ST/SA
SLEEP 0:15
SLEEP
TIMER
Audio
Broadcast
Audio Selected Main Picture Source
CHANNEL ID
Time
Sub-Picture
Source
PIP
SPECIAL
EVENT
REMINDER
SKIP (C.S.)
Channel
Skip
When an S-Video
Input is connected
to Video: 1.
When a COMPONENT:
Y-CbCr Input is
connected to Video: 2.
S - IN: 1
Y - CbCr: 2
ANT A 28 S - IN: 1 Y - CbCr: 2
ANT B 13 S - IN: 3
INPUT
INPUT
INPUT INPUT
INPUT