How to use the remote to control your plasma tv, The remote control – Hitachi 42HDX61 User Manual
Page 35
35
GU
ID
E
A/V N
ET
HOW TO USE THE REMOTE
TO CONTROL YOUR PLASMA TV
Jump
Slideshow
Rotate
Slideshow
Jump
Slideshow
Rotate
5 sec
Start
Interval
5 seconds
5 seconds.. etc.
SLIDESHOW
Select this menu item to start a slideshow of the Photos in the Digital Camera. Time interval selections can be set from 5, 10
and 30 seconds.
Use CURSOR PAD
̆
,
̄
to highlight Slideshow item.
While interval is highlighted, press SELECT to change interval time from 5, 10 and 30 seconds. Each press will change interval
time from the three mentioned choices.
Press SELECT to stop on a chosen picture of the slideshow. After 30 seconds, the slideshow will resume, or press SELECT again
to continue the slideshow.
Press EXIT to exit the slideshow.
Jump
Slideshow
Rotate
Rotate
1/10
1/10
1/10
ROTATE
Select this menu item to rotate selected photos either clockwise (CURSOR PAD
̈
) and counterclockwise (CURSOR PAD
̇
).
Rotate menu item is also available in THUMBNAIL view.
NOTES:
1.
Automatic contrast reduction also applies during SLIDESHOW, then press any button to continue.
2.
Photo file names modified on a computer should be 8 characters (Ex. ABCD1234.jpg). 1st character: letters;
2nd to 4th: letters or numbers; 5th to 8th: numbers. Photo files should be first placed on a sub directory name
with 8 characters (Ex. 123ABCDE). 1st to 3rd: number; 4th to 8th: letters. The sub directory then should be placed
on a main directory with a “dcim” file name format.
3.
Supported image types are up to 3072 x 2304; JPEG format should conform with DCF Standard (Design rule for
Camera File System).
4.
This TV set displays only digital pictures from digital cameras which meet DCF Standard. Pictures that were copied,
edited or modified on a computer may not be displayed on the TV set.
5.
The Rotate feature can also be used in THUMBNAIL view.
THE REMOTE CONTROL