Recording audio with still pictures – HP PhotoSmart 945 User Manual

Page 28

Advertising
background image

28

HP Photosmart 945 User’s Manual

NOTE

If you release the

Shutter

button only halfway after

taking a picture, the focus and exposure measurements

from the previous picture are retained. You can then press

the

Shutter

button all the way down again and take

another picture with the same focus and exposure as the

previous picture. You can continue to do this to capture a

sequence of pictures using the same focus and exposure.

This is helpful when rapidly taking pictures and for

capturing images for panoramic stitching.

Recording Audio with Still Pictures

There are two ways to attach an audio clip to a still picture:

Record the audio while you are taking the picture

(explained in this section).

Add an audio annotation to the picture later (or re-

record the audio that was captured when the picture was

taken). For details on how to do this, see

Play/Record

Audio

on page 64.

NOTE

The method described in this section is not available in

Self-Timer

or

Burst

modes.

1

Press the

Shutter

button all the way down to take the picture.

2

Continue to hold the

Shutter

button down to record the

audio clip. A microphone icon ( ) and audio counter

appear on the active display during recording.

3

To stop recording, release the

Shutter

button, otherwise the

audio will continue recording for up to 60 seconds or until

the memory card fills up, whichever comes first.

To play back, delete, or record new audio clips, use the

Record

Audio

section in the

Playback

menu (see

Using the Playback

Menu

on page 61).

Advertising