Mounting the library, Attach the mounting brackets, Mounting the library -10 – HP SureStore 4215w User Manual

Page 24: Attach the mounting brackets -10, Figure 1-3. rack slides -10

Advertising
background image

1-10

Installing the Tape Library

Step 4: Mount the Library in a Rack (optional)

Mounting the Library

To mount the tape library in a rack, you must:

•

First, attach the front and back mounting brackets to the rack slides.

•

Next, attach the rack slides to the rack.

•

Finally, attach the tape library to the rack slides.

These steps are explained in detail in the following sections.

Attach the Mounting Brackets

1. IMPORTANT: Lower the rack’s leveller feet using a 1/2-inch open-end wrench,

and extend the rack’s antitip rail.

WARNING

Failure to extend the antitip rail could result in personal injury and/or damage
to the tape library if the rack tips over.

2. Pull the rack slide members out to the fully extended position. (The slides

should “click” into a locked position.)

Figure 1-3

Rack Slides

Advertising