Installation – Harbor Freight Tools 47906 User Manual

Page 5

Advertising
background image

Page 5

For technical questions, please call 1-800-444-3353.

SKU 47906

inStALLAtiOn

discharge

intake

Pressure

Meter

Priming

inlet

Air Valve

(hidden)

Fig. 1

WArning! tO PrEVEnt SEriOUS injUrY

FrOM ELEctric SHOcK:

Install indoors or in weather-proof well

house only. This Pump is non-submers-

ible.

Do not plug in the power cord when wet

or standing on damp or wet ground.

Do

not plug in the power cord until instructed

to do so.

note: ONLY pump clean water.
note: Additional components (such as valves

and pipes) may be required for installa-

tion, but not included.

note: Installation requires skilled workman-

ship and compliance with local building

codes.

If you are not confident in your

ability to properly and safely install

this pump, have a qualified technician

perform the installation.

The water to be pumped must be clean

1.

and must be free of sand and grit, which

would damage the pump and void the

warranty.

Foot

Valve

check

Valve

Well

Seal

Shallow

Well Pump

to

Household

Water

System

Standing Water Level

(With Well Pump Off)

Pumping Water Level

(with Well Pump Operating)

Outlet Water

Level

Vertical W

ell Lift

Head

SLOPE SLigHtLY dOWnWArd tO WELL

Length of off-set line

(Add when calculating total suction

lift due to friction.)

Fig. 2

2. The illustration above shows an

example of a proper shallow well pump

installation. The total suction lift (vertical

well lift + length of off-set line) must not

exceed the Maximum Suction Lift listed

on the Specifications chart.

note: This pump is intended for shallow well

application only and is not intended to be

used as a booster pump.

note: For optimal performance, install the

pump as close to the well head as pos-

sible.
Install a Foot Valve at the bottom of the

3.

suction pipe. The Foot Valve must be

under the Pumping Water Level, the

level that the water falls to when the

pump operates.
Install a sterile Well Seal at the top of

4.

the suction pipe to keep the well clean.

Protect from rust inside a frost-proof

enclosure.

rEV 05l, 07g, 09d, 09e

Advertising