HP PROLIANT SERVER BLADE BL460C G6 - Manual (Page 82)

Troubleshooting 82
NOTE: For the location of server LEDs and information on their statuses, refer to the server
documentation.
Possible causes:
• Improperly seated or faulty internal or external component
• Unsupported component installed
• Redundancy failure
• System overtemperature condition
Item See
1 "Management agents (on page 60 )" or in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on the HP
website (
http://www.hp.com/support )
2 • "Integrated Management Log (on page 64 )" or in the HP ProLiant
Servers Troubleshooting Guide located on the Documentation CD or
on the HP website ( http://www.hp.com/support )
• "Event list error messages" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or on the HP website
(
http://www.hp.com/support )
3 "Component identification (on page 6 )"
4 System Management Homepage ( https://localhost:2381 )
5 "Power-on problems flowchart (" Server blade power-on problems
flowchart " on page 75 )"
6 • "Hardware problems" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or on the HP website
( http://www.hp.com/support )
• Maintenance and service guides for c-Class server blades, located on
the Documentation CD or the HP website
(
http://www.hp.com/go/bladesystem/documentation )
• "HP contact information (on page 94 )"
7 • "Hardware problems" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or on the HP website
( http://www.hp.com/support )
• Maintenance and service guides for c-Class server blades, located on
the Documentation CD or the HP website
(
http://www.hp.com/go/bladesystem/documentation )