HP SR2122-2 User Manual
HP Hardware
Advertising
Release Notes
hp StorageWorks
SR2122-2 IP Storage Router
Product Version: 3.4.5b
Fourth Edition (March 2005)
Part Number: AA-RV20C-TE
These release notes are for the HP StorageWorks SR2122-2 IP Storage Router running firmware version 3.4.5b
and provides important information not covered in other documentation.
For the latest version of these Release Notes and other IP storage router
documentation, access the HP storage
web site at
Advertising
Table of contents
Document Outline
- SR2122-2 IP Storage Router
- About this document
- Overview
- Identifying the SR2122-2 Version Level
- Identifying the HP-UX iSCSI Software Initiator version
- Identifying the HP Windows iSCSI driver version level
- Identifying the Linux Red Hat iSCSI driver version level
- SR2122-2 software and iSCSI driver updates
- Hardware and software support
- SR2122-2 configuration rules
- Known problems
- C-series MDS v2.01b switch firmware requirements
- ISL loss can result when the SR2122-2 is configured as FCIP and used to extend B-series switches upgraded to firmware 3.2.x or 4.4.x
- RA/MA8000, ESA/EMA12000 LUNs are initially passed to the SR2122-2 with the offset included in the LUN numbering.
- Ports FC1 and FC2 are set to Loop Preferred by default
- iSCSI CRC support