Husky A05051 - Manual (Page 12)

12- ENG A05051
Safety Valve: If the pressure switch
does not shut off the air compressor
at its "cut-out" pressure setting, the
safety valve will protect against high
pressure by "popping out" at its
factory set pressure (slightly higher
than the pressure switch "cut-out"
setting).
Outlet Pressure Gauge: The outlet
pressure gauge indicates the air
pressure available at the outlet side
of the regulator. This pressure is
controlled by the regulator and is
always less than or equal to the tank
pressure. Description of Operation
Become familiar with these controls
before operating the unit.
Off/Auto-On Switch: Turn this switch
to "Auto-On" to provide automatic
power to the pressure switch and
"Off" to shut off the power.
Pressure Switch (not shown): The
pressure switch automatically starts
the motor when the air tank pressure
drops below the factory set "cut-in"
pressure. It stops the motor when the
air tank pressure reaches the factory
set "cut-out" pressure.
OPERATION
Know Your Air Compressor
READ THIS OWNER’S MANUAL AND SAFETY RULES BEFORE OPERATING
YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the
location of various controls and adjustments. Save this manual for future reference.
Safety Nozzle
Air
Hose
Safety
Valve
Regulator
Outlet
Pressure
Gauge
Power
Cord
Off/Auto-On Switch
Blow
Gun
Blow Gun
Adapter
Inflating needle
Female
Tire
Chuck
Rubber
Tip
Nozzle
Tapered
Inflator
Accessory
Storage
High Flow
Inflator/Deflator
Adapter Body
Seal Ring
Nozzles to be used
with the High Flow
inflator/Deflator
adapter body
Telescopic Handle
Tapered
Inflator
Inflating
needle