HP BD-2000 - Manual (Page 26)

26
Playbac
k
Forward or Reverse
Playback
BD
DVD
AVCHD
VCD
1 During playback, press or to reverse
or forward playback.
2
Press the button repeatedly to switch
scanning speed (2x, 4x, 8x, 16x, 32x, 64x,
128x).
3 To resume to normal playback, press .
Some discs automatically resumes
normal playback when switching to a
new chapter.
Note:
You can also reverse or forward scan by holding
the button down. Normal playback resumes
when the button is released.
Notes:
When scanning BD, DVD, and VCD discs, no •
sound output is produced.
Sound is output during CD disc scanning.
•
Playback Controls
Some discs start playing automatically after
the BD player loads the disc. If not, use the
remote control to start playback.
1
Press to start playback.
To pause, press • .
To stop playback, press • .
To resume playback, press • again.
2
When playback is finished, press to
open the disc tray.
3 Remove the disc, then press to close
the disc tray.
4 Press to turn off the BD player.
Resuming playback
»
Some discs do not support resume •
playback function.
When
• is pressed, the point where
it stopped is saved in the BD player’s
memory. When is pressed, playback
resumes from the point where it stopped.
Unless due to the following conditions:
When the disc tray is opened. •
When the BD player’s power is turned •
off.
To cancel resume playback, press • twice.
WARNING
Do not leave the disc inside the BD player.