Hitachi DZMV750MA User Manual

Page 175

Advertising
background image

English

175

Error occurred. Please
replace disc.

An abnormality occurred with a DVD-R disc to be repaired.
Replace the disc.

Finalize may not be
complete. Finalize again
now?

Instantaneous shutoff occurred during finalizing, after which
power was supplied and disc was inserted.

138

It is unrecordable on
this card.

The inserted card cannot be used in this DVD video camera/
recorder: Use another card.

28

JPEG file related to
scenes are not found.

This message will appear when stills recorded on DVD-RAM disc
using a device other than this DVD video camera/recorder are to
be copied to card.

No card.

Insert a card.

49

No card.
Please insert card.

No card is inserted.
Insert a card.

49

NO DISC

This message may appear when the DVD video camera/recorder
or disc is moved from a cold place to a warm place.
Condensation has occurred on the camera/recorder lens or DVD-
RAM drive. Do not remove the disc; leave the DVD video camera/
recorder turned off in a place as dry as possible for 1 – 2 hours.

7

The disc has not been inserted.
Insert it.

46

The disc is not inserted correctly.
Push the disc against the turntable at the center until a click is
heard.
See *3 on page 177.

46

Is the disc surface/bottom reversed?
Check the surface/bottom of disc, and reinsert it correctly.

46, 47

No more scenes. Play
List was deleted.

All scenes are deleted from the play list.
Since a play list with no scenes cannot be supported by

specifications, a play list from which all registered scenes have
been deselected will be deleted.

130, 131

Photo cannot be
divided.

Still image cannot be divided.

115

PlayLists over limit.

An attempt was made to create new play list or copy play list,
even though limit specified for play lists in the video recording
standard had already been stored.

127

Same scenes on Play
List will be deleted.
Delete scenes?

This will appear when scenes are to be deleted.
When a play list exists on disc, an attempt to delete scenes in

program will display this message. (This message will not
appear if you deselect scenes from play list.)

113

Scenes over limit.
Cannot add scene.

The number of scenes entered in play list has reached the limit
that can be entered.
Delete several scenes.

127, 131

Scenes over limit.
Cannot divide scene.

The number of entered scenes has reached the limit that can be
entered.
Delete several scenes.

127, 131

Scenes over limit.
Cannot move scene.

This message will appear if you try to move a scene when the
number of scenes has already reached the registrable limit.

127

Stop processing

The C button was pressed to stop processing of multiple scenes.

Message

Cause & Troubleshooting

Reference

page

Advertising
This manual is related to the following products: