Humax LGB-22DRT - Manual (Page 52)

> > D T V S e t u p
Pa re n t a l C t r l.
L a n g u a g e S e t u p
M i s ce l l a n e o u s
S o f w a re U p d a te
S i gn a l S t re n g t h
S t a t u s
Move Enter
Software Update
Automatic Update
Manual Update
Move to the selected submenu
Now searching a new software...
Information
Cancle
Software Update
Automatic Update
Move to the selected submenu
Current Version
New Version
Software Update
Yes
LGB-19/22DRT 0.90.10
LGB-19/22DRT 0.90.15
New System Software is available.
Do you want to upgrade it now?
No
English-52
If new software is found when powering on
1 A message will be displayed to notify that new software is found.
2 Select Yes and press the OK button to update the software.
3 Starts downloading new software. Please wait until the updated is
completed.
4 When completing the software update, the equipment is automatically
powered off and on again.
If updating software from Menu
1 Press the MENU button.
2 Select System XVLQJWKHŸźEXWWRQDQGSUHVVWKHOKRUŹEXWWRQ
3 Select DTV Setup XVLQJWKHŸźEXWWRQDQGSUHVVWKHŹEXWWRQ
4 Select Software Update XVLQJWKHŸźEXWWRQDQGSUHVVWKHOKRUŹ
button.
Automatic Update
<RXFDQVHWWKH79WR¿QG+80$;VRIWZDUHXSGDWHVLWHDQGXSGDWHVRIWZDUH
automatically.
1 Select Automatic Update XVLQJWKHŸźEXWWRQDQGSUHVVWKHOKRUŹ
button. Automatically search for new software.
2 When detecting update software, the following result is displayed. If new
software is not found by Automatic Update, use Manual Update.
3 Select Yes and press the OK button to start updating. Select No and press
the OK button to return to the previous menu without updating.
4 Performs Software Update. Please wait until it is completed.
5 When completing the software update, the TV is automatically powered off
and on again.
Chapter 10 >> DTV Setup