Honeywell HMLCD15 - Manual (Page 11)

Rev. A 12 HMMU000880
04/08/04
3.2 PRESET MODE CHART, CONTINUED
The monitor is compatible with additional modes within one of
the following specified frequency ranges, provided they are
different at least for one of the following:
Horizontal Frequency: ±1 KHz
Vertical Frequency: ±1 Hz
3.3 ON-SCREEN DISPLAY (OSD) CONTROL PROCEDURE
Image and sound can easily be adjusted through an OSD menu.
3
2
1
4
1 AUTO / EXIT Used to exit OSD
2 MENU / SEL Used to start the OSD and select options
3 CH Z
4 SOURCE Y
Menu move/adjust buttons.
Used to move the menu bar or adjust
values.
Rev. A 1 HMMU000880
04/08/04
SECTION 1:
INTRODUCTION
1.1 INTRODUCTION
Honeywell's HMLCD15 TFT Color LCD Display features a 15.0"
viewable active matrix LCD screen, with outstanding 1024 x 768
pixel resolution. When used in PC based applications the
HMLCD15 provides connection points for VGA, PC Sound, and
headphones. CCTV applications are supported by input
connections for audio, Y/C (S-Video) and composite video
sources while providing a flicker free viewing experience not
normally experienced with traditional CRT-type monitors. Easy
to access front panel OSD display controls including direct
contrast, brightness, volume and mute control buttons along
with single button source selection for quick and easy
adjustments.
1.2 FEATURES
• XGA (1024x768) resolution LCD module
• 16,777,216 Color Display
• DPMS (Display Power Management Signaling)
• OSD (On-Screen Display) controls
• Multi-language OSD Menu
• Utilizes DDC1/2B controls. The system will perform Plug &
Play feature if both monitor and host system support
DDC1/2B protocol.
• Internal speakers