Harbor Freight Tools HUNTING SHELTER 96529 - Manual (Page 4)

Page 4 SKU 96529 For technical questions, please call 1-800-444-3353.
SpEcIFIcATIoNS
Material
Formed steel tubing / Camouflage polyester with dark olive
green draw strings and hook and loop closures.
Main Tube Dimensions 5/8” O.D. x 58-11/16” Long
Recommended Tree
Trunk Diameter
9-4/5” to 15-11/16”
Rear Tree Support
Bar Dimensions
18-1/2” Wide x 6” L x 3/16” Thick
Cross Tube
Dimensions
5/8” O.D. x 24” Long
Arm Tube Dimensions 5/8” O.D. x 22-1/2” Long
Side Tube Dimensions 5/8” O.D. x 14-1/8” Wide x 48-1/2” Long
Overall Dimensions
60” Long x 48” Wide x 81-1/2” High
(includes roof and side walls fully assembled)
Net Weight 16 lb.
UNpAckING
When unpacking, check to make sure that the item is intact and undamaged. if
any parts are missing or broken, please call Harbor Freight Tools at the number shown
on the cover of this manual as soon as possible.
SET Up INSTRUcTIoNS
Read the ENTIRE IMpoRTANT SAFETy INSTRUcTIoNS section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
Note:
For additional information regarding the parts listed in the following pages, refer
to the Assembly Diagram on page 7 of this manual.
Set the Main Support Frame (3) and the two pieces of Side Frame (2) on a dry, 1.
flat, level surface. (See Assy. Diagram.)
Unfold the two Hinging Braces (4) on the Main Support Frame. Then attach the 2.
Support Brace (5) to the Main Support Frame using two Bolts (9), two Flat Wash-
ers (15), and two Lock Nuts (16). (See Assy. Diagram.)
insert the two Side Frames (2) into the Main Support Frame (3), and fasten the 3.
two Side Frames to the Main Support Frame using two Bolts (14), two Flat Wash-
ers (15), and two Lock Nuts (16). (See Assy. Diagram.)
Affix the Strips of the Fabric Cover (1) around the edges of the Main Support 4.
Frame (3) and Side Frames (2) with the Draw Strings and Hook and Loop Clo-
sures. (See Assy. Diagram.)
ReV 09a