HP DV6 - Manual (Page 75)

2. Remove the three Phillips PM2.5×5.5 screws that secure the top cover to the computer.
3. Remove the nine Phillips PM2.5×3.5 screws that secure the top cover to the computer.
4. Turn the computer right side up, with the front toward you.
5. Open the computer.
6. Release the corresponding ZIF connectors, and then disconnect the following cables from
the system board:
(1) Power button board cable
(2) TouchPad button board cable
(3) Fingerprint reader board cable
(4) Top speakers cable
Component replacement procedures 67