HP 2610-PWR - Manual (Page 49)

Static Virtual LANs (VLANs)
Port-Based Virtual LANs (Static VLANs)
Displaying the Configuration for a Particular VLAN
This command uses the VID to identify and display the data for a specific static
or dynamic VLAN.
Syntax: show vlan <vlan-id>
Figure 2-18. Example of “Show VLAN” for a Specific Static VLAN
Show VLAN lists this
data when GVRP is
enabled and at least
one port on the switch
has dynamically
joined the designated
VLAN.
Figure 2-19. Example of “Show VLAN” for a Specific Dynamic VLAN
2-23