Hi-Touch Imaging Technologies P510S - Manual (Page 39)

Scenario 2
Using Nikon DSLR to take pictures and printing photos by P510Si
(Example on Nikon D200)
Before the setting, you need to connect Nikon wireless transmitter to your camera in advance. For detailed instruction of
transmitter setting, there’s need to read the user’s manual of Nikon wireless transmitter WT-3. On P510Si, we provide a
brief introduction of how to set up your Canon transmitter.
1) On P510Si, go to Settings \ Advanced Setting
2) Select Wireless for Camera and enable the function. Exit the setup page and wireless adapter automatically
activates. See below for detail
3) After wireless function is activated, by EDIT button users can see the detailed info about wireless adaptor. Press “ X ”
to start the instruction of setting camera wireless file transmitter.
SSID is allowed to change freely.
However, setting of SSID on P510Si MUST
be consistent with SSID setting on camera
transmitter.
Select camera in advance Installing WT-3A to Nikon D200 Basic setting of image transferring
FTP registration Set SSID (Must be same as printer) TCP/IP setup
39