Lamp replacement, 120v – Hitachi 50C10E User Manual
Page 58
58
LAMP REPLACEMENT
120V
PUSH
POWER
FRONT COVER
1.
Turn off the main power switch and unplug the power cord. Wait at least 30 minutes to allow the lamp to cool down before
replacing it.
NOTE:
THE LAMP IS VERY HOT AND MAY CAUSE FIRE OR SEVERE BURNS. WAIT AT LEAST 30~45
MINUTES TO ALLOW THE LAMP TO COOL BEFORE PROCEEDING WITH LAMP REMOVAL.
FRONT COVER
PUSH
PULL
LAMP COMPARTMENT
INPUT 5
S-VIDEO
EXIT
INPUT
SELECT
MENU
VOL-
VOL+
CH-
CH+
̈
̇
̆
̄
VIDEO
AUDIO
L/MONO
R
2.
Remove the front cover from the TV set. This is held by a snap on. Pull the front cover outwards until the quick snap on
disengages.
NOTE:
This product contains lead and a lamp that contains mercury. Dispose of this product and its lamp in accordance with
applicable environmental laws. For lamp recycling and disposal information, go to www.lamprecycle.org. For product
recycling and disposal information, contact your local government agency or the Electronic Industries Alliance at
www.eiae.org (in the US) or the Electronic Product Stewardship Canada at www.epsc.ca (in Canada).
For more information, call “1-800-HITACHI.”
LAMP
REPLACEMENT