Husqvarna HUV 4213-GXP - Manual (Page 31)

Periodic Lubrication Schedule
PERIODIC LUBRICATION SCHEDULE
PERIODIC LUBRICATION SCHEDULE
REGULAR INTERVAL SERVICE
LUBRICATION
POINTS
RECOMMENDED LUBRICANT
Brake pedal shaft bearings 1 Dry Moly Lube (P/N 603 00 00-01)
Accelerator push rod pivots, mounts,
and shifter cable pivots
2 Dry Moly Lube (P/N 603 00 00-01)
Semiannually by owner or
trained technician (or every 50
hours of operation, whichever
comes first)
Front suspension (2 fittings) Chassis Lube (EP NLGI Grade 2)
Check/fill transaxle to plug level
29 oz. (.85 liters) 80-90 Wt. API
Class GL-3 or 80-90 Wt. AGMA Class
5 EP gear lubricant
Annually by trained technician
only (or every 100 hours of
operation, whichever comes
first)
Inspect front wheel bearings (Repack
as necessary)
Chassis Lube (EP NLGI Grade 2)
First change 100 hours –
additional change every 200
hours of operation or annually,
whichever comes first
Change engine oil and oil filter
32 oz. (0.95 liter) without filter; 38
oz. (1.12 liters) with filter. See Oil
Viscosity on page 34.
2
4
1
6
2
2
3
5
3
5
2
2
1
167
Figure 15 Lubrication Points
2008 HUV 4213-G and HUV 4213-GXP Owner’s Manual Page 29