Home Automation 70A00-1 - Manual (Page 8)

Installation
①
Antenna Jack
② Power Switch
③ Power Jack
④ Phone Jack
⑤ PSTN Jack
①
Antenna Jack (SMA): Connects the supplied antenna
② Power Switch: Turns the unit On or Off
③ Power Jack: Connects the 12V Power Adapter
④ Phone Jack: Connects to house telephones or alarm panel
⑤ PSTN Jack: Connects to PSTN telephone line
Install the Antenna
1) Screw the antenna onto the antenna base.
2) Attach the SMA connector of the base to the C3 Antenna Jack.
3) Locate the antenna away from the C3.
4) Completely uncoil the antenna cable to avoid interference.
Warning: Do not mount the antenna outdoors.
Install the Power Adapter
Plug the connector from the supplied AC Power Adapter into the C3
Power Jack.
Plug the AC Power Adapter into a 120VAC outlet.
4