Healthrider HRSY54370 - Manual (Page 6)

2. Press four 2Ó Square Inner Caps (68) into the
Frame (2).
Identify the Left Wheel Channel (3) and the Right
Wheel Channel (4) by comparing the welded
brackets on the bottom of each Wheel Channel.
Slide the Left Wheel Channel (3) onto the indicated
Small Wheels (40) attached to the Frame (2).
Note: This will be easier to do if you lie the
Frame on the floor.
Slide the Right Wheel Channel (4) onto the Frame
(2) in the same manner.
3. Slide the Left and Right Wheel Channels (3, 4)
onto the 3/8Ó x 2 1/2Ó Carriage Bolts (60) in the
Base (1). Partially tighten a 3/8Ó Nylon Locknut
(39) onto each Carriage Bolt but do not fully
tighten the Nylon Locknuts yet.
2
4
40
68
68
40
3
2
3
6
4
3
1
39
39
60
60
68
68