HP SecureDIMM II User Manual
Page 20
Advertising
2 0
5. If an encrypted printer port has already been configured on your system,
skip to step 9. Otherwise, click the Create a new port button, select
Redirected Port from the drop-down box, and then click the Next button.
6. Enter Encrypted: as the redirected port name. Click the OK button.
7. Set the redirected port parameters as follows:
Redirect this port to the program: C:\Capella Tech\AESCrypt.exe
Arguments for this program are:
-e 000102030405060708090a0b0c0d0e0f
Output:
Copy stdout to printer
Printer:
HP LaserJet 4100 PCL6
Run:
Hidden
Note that Printer: may reference any standard (not encrypted) printer driver
that is configured to print to the port (network or local) where the printer is
attached.
Advertising