Channel manager, Ant a/ant b, Ant c – Hitachi 57XWX20B User Manual
Page 55
CHANNEL MANAGER
55
This selection contains advanced features which will make TV viewing easier and more enjoyable. Use
this feature to give up to 20 channels a name when ANTENNA signal source is selected and up to 60
channels a name when CATV signal source is selected.
NOTES:
1.
If ANT A and ANT B are in the same ANTENNA/CABLE mode, the CHANNEL ID for both antenna inputs will be the
same.
2.
CHANNEL ID will be displayed only when channel is displayed as main picture.
3.
CHANNEL ID in ANT C are automatically set by the channel broadcaster and cannot be changed to your preference.
4.
To get CHANNEL ID in ANT C, Auto Channel Scan must be done first.
5.
ANT C will have no channel listing if there are no available channels.
6.
CHANNEL ID in ANT C will not be displayed when PIP is on.
Channel ID
Channel Manager
Move
Edit (A-Z, 0-9, _, -)
Ant A
CH#
Scan
CH ID
Lock
2
On
--------
3
On
--------
4
Off
--------
5
Off
--------
6
Off
--------
7
Off
--------
8
Off
--------
9
Off
--------
Channel Manager
SEL
Return
Ant A
CH#
Scan
CH ID
Lock
2
On
A-------
3
On
--------
4
Off
--------
5
Off
--------
6
Off
--------
7
Off
--------
8
Off
--------
9
Off
--------
Channel Manager
Ant A
CH#
Scan
CH ID
Lock
2
On
A-------
3
On
--------
4
Off
--------
5
Off
--------
6
Off
--------
7
Off
--------
8
Off
--------
9
Off
--------
THUMB
STICK
THUMB
STICK
THUMB
STICK
[
]
[
]
[
]
Move
Edit (A-Z, 0-9, _, -)
SEL
Return
Move
Edit (A-Z, 0-9, _, -)
SEL
Return
ANT A/ANT B
Channel Manager
Ant C (DTV)
CH#
Scan
CH ID
Lock
8-2
On
KFMB SD
10-1
On
KGTV-HD
15-1
On
KPBS-HD
15-2
On
KPBS-DT
23-1
On
XETV-DT
40-1
On
CH1
8-1
On
KFMB HD
Move
SEL
Return
ANT C