How do i use dual medi a rolls – HP 10000s User Manual
Page 123
7.
Close the rear cover.
To complete the loading procedure, follow the front panel instructions.
8.
Confirm the position of the media edge guards and press the
OK
key.
The media width checking process starts.
9.
Select DUAL in the media selection on the front panel.
10.
Select a media type.
a.
Select the media type using the or keys.
There are five preset media types to choose from:
●
Paper
●
Glossy
●
Matte
●
Banner
●
BLT_B (Backlit)
b.
Press the
OK
key to confirm.
NOTE
If you wish to select a media type that is currently not available, then you will
need to create a new media type.
c.
If required, select the NEW MEDIA ENTRY option using the or key and press the
OK
key
(Refer to
Manage media types
).
Press the
Cancel
key to return to the SELECT MEDIA menu.
11.
Prepare two tension bars, each with a length of half the media width. Remove the flanges from the
tension bars.
ENWW
Install dual media rolls on the main scroller
113
How do
I use dual medi
a
rolls?