Horizon Fitness HORIZON SERIES T90 - Manual (Page 6)

10
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
TREADMILL OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
11
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE YOU
BEGIN
TREADMILL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
ASSEMBLY STEP 
BOLT (F)
SPRING WASHER (C)
FLAT WASHER (D)
CONSOLE
CONSOLE CABLE
DO NOT ATTACH
THIS SIDE UNTIL STEP 3-D
LEFT CONSOLE MAST
BOLT (F)
25 mm
Qty: 4 SPRING WASHER (C)
15 mm
Qty: 4 FLAT WASHER (D)
15 mm
Qty: 4
HARDWARE BAG  CONTENTS :
A Open HARDWARE BAG .
B With running deck in lowered position, place CONSOLE on the console masts. Align the
brackets that are underneath the console with the top holes of the console masts.
C To assemble the CONSOLE to the LEFT CONSOLE MAST, insert 1 BOLT (F),
1 SPRING WASHER (C) and 1 FLAT WASHER (D) into the 2 holes in the
LEFT CONSOLE MAST and lightly tighten.
D Locate CONSOLE CABLE COVER on back of CONSOLE and remove.
E Attach CONSOLE CABLE to CONSOLE BOARD. NOTE: Do not pinch CONSOLE CABLE.
F Replace CONSOLE CABLE COVER on back of CONSOLE and attach excess wire to CABLE TIE.
G Repeat STEP C above to assemble the RIGHT CONSOLE MAST to the CONSOLE.
ASSEMBLY STEP 
SCREWS (I)
DECK
LOCK
LATCH
LEFT HANDLEBAR
Open HARDWARE BAG .
Attach DECK LOCK LATCH to LEFT HANDLEBAR using 2 SCREWS (I).
Slide the WATER BOTTLE HOLDER down into the hole in the CONSOLE and snap together. A
B
C
NOTE: Do not completely tighten any screws or bolts until step 5 is complete!
SCREW (I)
15 mm
Qty: 2
HARDWARE BAG  CONTENTS :
WATER BOTTLE
HOLDER
ASSEMBLY STEP  (CONTINUED)
ATTENTION!
Please note assembly changes to User’s Guide.
CONSOLE CABLE COVER
CABLE TIE
CONSOLE CABLE COVER
CABLE TIE
CONSOLE
BOARD
CONSOLE
CABLE
D Locate CONSOLE CABLE COVER on
back of CONSOLE and remove.
E Attach CONSOLE CABLE to
CONSOLE BOARD. NOTE: Do not
pinch CONSOLE CABLE.
F Replace CONSOLE CABLE COVER on
back of CONSOLE and attach excess
wire to CABLE TIE.
ASSEMBLY STEP 3
NOTE: Assembly step D modified to reflect proper CONSOLE CABLE connection to CONSOLE.
ATTENTION!
Please note assembly changes to User’s Guide.
CONSOLE CABLE COVER
CABLE TIE
CONSOLE CABLE COVER
CABLE TIE
CONSOLE
BOARD
CONSOLE
CABLE
D Locate CONSOLE CABLE COVER on
back of CONSOLE and remove.
E Attach CONSOLE CABLE to
CONSOLE BOARD. NOTE: Do not
pinch CONSOLE CABLE.
F Replace CONSOLE CABLE COVER on
back of CONSOLE and attach excess
wire to CABLE TIE.
ASSEMBLY STEP 3
NOTE: Assembly step D modified to reflect proper CONSOLE CABLE connection to CONSOLE.
ATTENTION!
Please note assembly changes to User’s Guide.
CONSOLE CABLE COVER
CABLE TIE
CONSOLE CABLE COVER
CABLE TIE
CONSOLE
BOARD
CONSOLE
CABLE
D Locate CONSOLE CABLE COVER on
back of CONSOLE and remove.
E Attach CONSOLE CABLE to
CONSOLE BOARD. NOTE: Do not
pinch CONSOLE CABLE.
F Replace CONSOLE CABLE COVER on
back of CONSOLE and attach excess
wire to CABLE TIE.
ASSEMBLY STEP 3
NOTE: Assembly step D modified to reflect proper CONSOLE CABLE connection to CONSOLE.
STEP D STEP E
STEP F
T90_Rev.1.5.indd 10-11 9/10/08 4:21:04 PM