Important safety instructions warning – Homelite UT42120 User Manual

Page 5

Advertising
background image

Page 3 – English

IMPORTANT SAfETy INSTRUcTIONS

wARNING:

READ AND UNDERSTAND ALL INSTRUcTIONS. Fail-
ure to follow all instructions listed below may result in
electric shock, fire, and/or serious personal injury.

READ THESE INSTRUcTIONS bEfORE USING
THIS bLOwER/vAc

Do not operate power tools in explosive atmospheres,

such as in the presence of flammable liquids, gases, or

dust. Power tools create sparks which may ignite the dust

or fumes.

To reduce the risk of electric shock, this tool has a po-

larized plug (one blade is wider than the other) and will

require the use of a polarized extension cord. The plug

will fit into a polarized extension cord only one way. If the

plug does not fit fully into the extension cord, reverse the

plug. If the plug still does not fit, obtain a correct polarized

extension cord. A polarized extension cord will require

the use of a polarized wall outlet. This plug will fit into the

polarized wall outlet only one way. If the plug does not fit

fully into the wall outlet, reverse the plug. If the plug still

does not fit, contact a qualified electrician to install the

proper wall outlet. Do not change the equipment plug,

extension cord receptacle, or extension cord plug in any

way.

Avoid body contact with grounded surfaces such as pipes,

radiators, ranges, and refrigerators. There is an increased

risk of electric shock if your body is grounded.

Don’t expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of

electric shock.

Do not handle plug or tool with wet hands.

Use outdoor extension cords marked W-A, W, SW-A,

SOW-A, STW-A, STOW-A, SJW-A, SJTW-A, or SJTOW-A.

These cords are rated for outdoor use and reduce the risk

of electric shock.

Never allow children to operate the equipment. Never

allow adults to operate the equipment without proper

instruction.

Wear eye protection with side shields which is marked to

comply with ANSI Z87.1, along with hearing protection

when operating this product.

Always use face or dust mask if operation is dusty.

Use extra care when cleaning on stairs.

Do not leave appliance plugged in. Unplug from outlet

when not in use and before servicing.

Do not expose to rain, store indoors.

Use only as described in this manual. Use only manufac-

turer’s recommended attachments.

Keep hair, loose clothing, fingers, and all body parts away

from openings and moving parts.

To reduce the risk of electric shock, this appliance has a

polarized plug (one blade is wider than the other). This

plug will fit in a polarized outlet only one way. If the plug

does not fit fully in the outlet, reverse the plug. If it still

does not fit, contact a qualified electrician to install the

proper outlet. Do not change the plug in any way.

Wear heavy long pants, long sleeves, boots, and gloves.

Avoid loose garments or jewelry that could get caught in

moving parts of the machine or its motor.

Do not force tool. Use the correct tool for your

application. The correct tool will do the job better and

safer at the rate for which it is designed.

Do not operate the equipment while barefoot or when

wearing sandals or similar lightweight footwear. Wear

protective footwear that will protect your feet and improve

your footing on slippery surfaces.

Do not use on steps, a ladder, roof top, tree, or other

unstable support. Stable footing on a solid surface

enables better control of the blower/vac in unexpected

situations.

Secure long hair so it is above shoulder level to prevent

entanglement in any moving parts.

Keep firm footing and balance. Do not overreach.

Overreaching can result in loss of balance.

Turn off all controls before unplugging.

Do not allow to be used as a toy. Close attention is nec-

essary when used by or near children.

Avoid accidental starting. Be sure the power switch is

not on before plugging in. Turn off power switch before

unplugging.

Do not use tool if switch does not turn it on or off. Any

tool that cannot be controlled with the switch is danger-

ous and must be repaired.

Do not leave the tool when plugged in. Unplug from

the power outlet when not in use, before servicing, and

before storing the tool. Such preventative safety measures

reduce the risk of starting the tool accidentally.

 Keep all bystanders, children, and pets at least 50 ft.

away.

 Do not operate this unit when you are tired, ill, upset, or

under the influence of alcohol, drugs, or medication.

Do not operate in poor lighting.

 Keep all parts of your body away from any moving parts

and all hot surfaces of the unit.

Check the work area before each use. Remove all objects

such as rocks, broken glass, nails, wire, or string which

can be thrown or become entangled in the machine.

Never use blower/vac near fires, fireplaces, hot ashes,

barbecue pits, etc., which may cause fire to spread.

Do not pull or carry by cord, use cord as a handle, close
a door on a cord, or pull cord around sharp edges or
corners. Keep cord away from heated surfaces.

Advertising