HANNspree LIQUID CRYSTAL DISPLAY TELEVISION MAK-000022 - Manual (Page 22)

21
Inserting the Remote Control Battery/Batteries
1
Open the battery compartment cover at the back of the remote control (A).
2
For AAA batteries: Insert the batteries paying attention to the
polarity markings inside the battery compartment (B).
For lithium batteries: Insert the battery / batteries with the positive
side (+) facing up (B). Remember to slide the battery / batteries
underneath the metal contacts. Press downward to set the battery /
batteries in place.
3 Replace the battery compartment cover (C) / (D).
Note
Your remote control may have either AAA type batteries or
CR2032 / CR2025 lithium battery/batteries.
A
B
C
A
B
C
A
B
C
D
AAA batteries Lithium batteries 1 Lithium batteries 2