Harbor Freight Tools 42597 - Manual (Page 5)

Page 5 SKU 42597
Adjusting Shoe
Use the Adjustable Bottom Plate (1) to determine the depth of your cut. Position the Shoe
close to the Rubber Sleeve (3) for a deeper cut, further out for a shallower cut.
1. Loosen Hex Screws (2) with supplied Hex Key Wrench.
2. Position the Adjustable Bottom Plate (1) to the desired position.
3. Tighten Hex Screws (2).
Operation
Operational Precautions
1. Check the Saw Blade to make sure it does not have any missing teeth or cracks. Do
not use a damaged Saw Blade.
2. Check that there is enough space under and behind the workpiece for the
reciprocation blade. Be sure that you will not be cutting through any electrical wires or
your workbench.
3. Do not put side-to-side pressure on the blade as it may break.
4. Never attempt to remove material stuck in the moving parts of the saw while the saw in
running and plugged in.
Screw (4)
Blade
Saw Blade
Hex Screws (2)
Adjustable Bottom Plate (1)
Rubber Sleeve (3)