Hitachi 50EX13KX - Manual (Page 13)

REAR PANEL JACKS - 13 -
NOTE: Your HITACHI TV will appear to be turned "off" if there is no video input when VIDEO: 1
or VIDEO: 2 is selected. Check the POWER Light to make sure the TV is off when not in use.
W W W W AI (Artificial Intelligence) sensor
This "Artificial Intelligence" sensor will make automatic picture adjustments depending on the
amount of light in the room to give the best picture. (See page 34)
X X X X REMOTE CONTROL sensor
Point your Remote at this area when selecting channels, adjusting volume, etc.
REAR PANEL JACKS
Click to see Rear Panel Jacks.
Q Q Q Q Antenna Input
Use an "F" type coaxial cable to connect an antenna or cable TV (CATV) output to this rear
panel jack.
R R R R Audio/Video Inputs 1, 2
The "AVX" (Auxiliary video) button will step through each video source and the current antenna
input each time it is pressed. Use the audio and video inputs to connect external devices, such as
VCRs, camcorders, laser disc players, etc. (If you have mono sound, insert the audio cable into
the left channel jack.)
S S S S Monitor Out
These jacks provide fixed audio and video signals which are used for recording.
T T T T Audio to Hi-Fi
These jacks provide variable audio output to a separate stereo system amplifier. With this
connection, the audio to the stereo can be controlled by the television's remote control.
U U U U Speaker Matrix Surround Switch
Use this switch to choose between the surround and external speaker features. See page 13 for
Audio System setup. The TV's Internal Speakers will be switched off when "EXT." is selected.
V V V V Rear Speaker Terminals
These terminals are used to connect external speakers, which are used for the surround sound
feature. The volume level is controlled by the remote control main volume buttons. Use speakers
with 8 Ohm impedance only.
W W W W S-Video
Input 1 provides S-Video (Super Video) jacks for connecting equipment with S-Video output
capability.