High End Systems SHOWGUN - Manual (Page 32)

CHAPTER 3
SHOWGUN® Menu System
20 SHOWGUN ® User Manual
Menu Map
Level 1 Level 2 Option/Setting Description/Notes
DMX ADDRESS
MENU
SET DMX START
CHANNEL: ###
1-483
Selected value becomes the first DMX value
in the range for that fixture on a DMX 512
link.
SET MENU
FACTORY DEFAULT
SETTINGS: ### ON Reverts fixture to default setting
OFF Indicates a factory default has changed
PAN/TILT SWAP:
DISABLED Restores default Pan and Tilt Motion
ENABLED Swaps the Pan and Tilt Motion
PAN INVERT:
DISABLED Restores default Pan motor direction
ENABLED Inverts Pan motor direction
TILT INVERT:
DISABLED Restores default Tilt motor direction
ENABLED Inverts Tilt motor direction
DISPLAY LEVEL:
OFF Display fully dimmed when menu is locked
ON Turns display on
LAMP LIFE LIMIT:
DISABLED Disables lamp life tracking
ENABLED
Tracks the time the lamp is on and sends a
warning at 500 hrs
DATA LOSS
TIMEOUT:
SHORT Shutter closes 1 second after data loss
LONG Shutter closes when fixture shuts down
FIXTURE MODE
MENU CROSSLOAD
FIRMWARE:
NO Safe setting
YES
Uploads fixture software to all other
SHOWGUN fixtures on the link
TEST MENU
HOME FIXTURE: ALL Homes all fixture functions
LAMP STATE:
OFF Indicates or turns lamp off
ON Indicates or turns lamp on
COPY BOOT:
NO Does nothing when selected
YES Copies boot code to fixture
DISPLAY TEST
OFF Default Safe setting
ON Performs Display test
SETUP MOTORS
OFF Default Safe setting
ON Runs motor setup routine
ENCODER TEST
OFF Leaves encoders enabled
ON Disables encoders
CAL RGB LEDS OFF Default Safe setting
ON Calibrates the RGB LEDs
CODE MENU For factory use only
INFOMATION
MENU
SENSOR STATUS
MENU
PAN Displays absolute position of Pan
TILT Displays absolute position of Tilt
UNIQUE NUMBER
########## Displays fixture’s unique 10-character
number