Healthrider HREX1395.0 - Manual (Page 4)

4
ASSEMBLY
To hire an authorized service technician to assemble the exercise cycle, call toll-free 1-800-445-2480.
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the pack-
ing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included
hex keys, assembly requires a phillips screwdriver and an adjustable wrench .
As you assemble the exercise cycle, use the drawings below to identify small parts. The number in parentheses
below each drawing is the key number of the part, from the PART LIST on page 14. The number following the
parentheses is the quantity needed for assembly. Note: Some small parts may have been pre-assembled. If a
part is not in the parts bag, check to see if it has been pre-assembled.
M8 Nylon
Locknut (17)–2
M8 x 20mm
Washer (10)–8
M8 x 70mm
Carriage Bolt (9)–2
M8 x 16mm
Bolt (87)–4
M8 x 16mm
Screw (62)–3
M4 x 12mm
Screw (106)–4
M8 Acorn Nut
(11)–2
M8 x 80mm Hex
Bolt (40)–2
M8 x 40mm
Screw (63)–2
M8 Curved
Washer (107)–7