hussmann INNOVATOR P/N 0425683F - Manual (Page 14)

shelf and over the lamp tube and wires. The top
part of the diffuser must be below the honeycomb
retainer and above the lamp tube. The bottom
filler need not be removed. See Figure 20.
4. Pull the top lamp-holder out of the lamp-
holder bracket as shown below.
5. Next, remove the lamp-holder from the lamp
and pull the lamp out of the bottom lamp-holder.
6. Remove the tube guard from old lamp and
place it on the new lamp.
7. Install the new lamp in reverse order. Ensure
lamp pins line up with lamp-holder holes as
shown below, and that lamp-holder is fully
engaged in lamp-holder bracket.
P/N 0425683F ®
12
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A. • WWW.HUSSMANN.COM
Pull
lamp-holder
Bracket
lamp-holder
Lamp
Remove
lamp-holder
Remove
Lamp
from
Bottom
lamp-holder
Figure 20.
Removing Diffuser from Center Mullion Lamp
Diffuser
Bottom Filler