HP N6350 - Manual (Page 55)

3. Click the Network tab.
4. Click the Check Status button.
Problems connecting to a wired network
• If the Link light on the network connector does not turn on, make sure you have
completed the items listed under Basic troubleshooting tips in this chapter.
• Though it is not recommended that you assign the device with a static IP address,
you might resolve some installation problems (such as a conflict with a personal
firewall) by doing so.
See also
“Basic troubleshooting tips” on page 36
“Change network setup type” on page 24
Additional troubleshooting information
For additional troubleshooting information, see the following resources:
•
To look for updated information about the scanner, see www.hp.com/support .
◦ Select your country/region, and then select your language.
◦ Enter the scanner model number, and then press Enter.
• If you do not have Internet access, see the information about getting assistance in
the printed Getting Started Guide for information on contacting HP support.
Additional troubleshooting information 53