Harbor Freight Tools 93660 User Manual
Page 2
SAFETY WARNINGS AND PRECAUTIONS
1. KEEP PRODUCT USAGE AREA CLEAN.
Cluttered areas invite injuries.
2. KEEP CHILDREN AWAY FROM PRODUCT USAGE
AREA. Do not allow children to handle this product.
3. DO NOT SET UP THIS PRODUCT IF UNDER THE
INFLUENCE OF ALCOHOL OR DRUGS. Read
warning labels on prescriptions to determine if your
judgement or reflexes are impaired while taking drugs.
If there is any doubt, do not attempt to use this product.
4. USE EYE PROTECTION DURING ASSEMBLY.
Wear ANSI approved safety impact eye goggles. The
ANSI approved safety impact goggles are available from
Harbor Freight Tools.
5. DO NOT ATTEMPT TO ASSEMBLE OR USE THIS
PRODUCT IN MODERATE OR HEAVY WIND CONDI-
TIONS. Doing so may cause personal injury and/or
damage to the umbrella
and personal property.
6. CHECK FOR DAMAGED PARTS. Before using this
product, carefully check that it will operate properly and
perform its intended function. Check for damaged parts
and any other conditions that may affect its operation.
Replace or repair damaged or worn parts immediately.
7. MAINTENANCE: Service and maintenance should
be performed regularly by a qualified technician.
8. USE THE RIGHT PRODUCT FOR THE RIGHT
JOB. There are certain applications for which this
product was designed. Use this product ONLY with
a heavy duty stand, weighing at least 18 Lbs., and
capable of firmly securing this umbrella. Do not use
this product in a way for which it is not intended.
SAVE THIS INSTRUCTION FLYER
You will need this instruction flyer for the Operating
and Maintenance Procedures, Safety Warnings and
Precautions, Parts List and Assembly Diagram. Keep
your invoice with this instruction flyer. Write the invoice
number on the front of this flyer. Keep this
instruction flyer and invoice in a safe and dry place
for future reference.
NOTE: Some parts are listed and shown for illustration
purposes only, and are not available individually as
replacement parts.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL
ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND
TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALI-
FIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNI-
CIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO
THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF RE-
PLACEMENT PARTS THERETO.
10
PART # DESCRIPTION QTY
1
2
3
4
5
6
7
8
9
Top Finial
Air Vent
Cover
Rib
Hub/Runner
Upper Pole
Connector/Crank
Lower Poll
Tilt Mechanism
w/ Push Button
1
1
1
8
1
1
1
1
1
PARTS LIST / ASSEMBLY DIAGRAM
Push Button (9)