Heat & Glo Fireplace 6000GCF-IPILP - Manual (Page 35)

Heat & Glo • 6000GCF-IPI, 6000GCF-IPILP • 2110-900 Rev. G • 9/08 35
12 12
Appliance Setup
A. Remove Shipping Materials
Remove shipping materials from inside or
underneath the fi rebox.
B. Clean the Appliance
Clean/vacuum any sawdust that may have
accumulated inside the fi rebox or underneath
in the control cavity.
C. Accessories
Install approved accessories per instructions
included with accessories. See Service Parts
List for appropriate accessories. Refer to
Section 16.
Removing Optional GFK-160A Fan
ITEM
1 - Remove front from the fi replace (see Fig-
ure 12.1).
2 - Remove glass assembly from the fi replace
(see Figure 12.1).
3 - Remove logs.
4 - Remove grate (see Figure 12.1).
5 - Remove side and back refractory.
6 - Remove burner assembly (see Figure 12.1).
7 - Remove valve assembly (see Figure 12.1).
8 - Disconnect fan and remove it through the valve as-
sembly cavity (see Figure 12.2).
Figure 12.1
Figure 12.2
1
2
4
6
7
REMOVE FAN THROUGH
VALVE ASSEMBLY CAVITY
8
RHEOSTAT
Figure 12.3 Rheostat Location