haier HWM60-20B - Manual (Page 13)

1 Push the "POWER ON/OFF " button to switch on the power.
POWER
ON/OFF
3 Push the PROCEDURE button to select suitable procedure.
11
SPIN
WASH
RINSE
SOAK
STANDARD
GENTLE
HEAVY
FAST
POWER
ON/OFF
START
PAUSE
WATER
LEVEL
RESERVE
SURPLUS
(MIN)
RESERVE(HOURS LATER)
PROCEDURE
PROGRAM
JEANS
Steps of using the operation buttons and description of the steps
PROGRAM
suitable automatic program. Push the "PROGRAM" button to select
After switching on the power, the machine will set standard program automatically. To select other automatic
program, push the "program" button till the relative indicator is on. Refer to the "program button" on Page
10 for the selection.
For instance: select "FAST"program for laundries with small
quantity and light soil.
Page 10
In selecting the standard program, the machine
will execute fuzzy program to select water level
and wash time according to the cloth and weight
of the laundries. The full procedure is controlled
automatically.
PROCEDURE
After switching on the power, the washing machine will set wash-rinse-spin procedure
automatically. it is the standard procedure. to select other procedures, push the procrdure
button to select one or more procedures from soak, wash, rinse and spin. Refer to the
PROCEDURE SELECTION METHOD on Page 12 for the selection.
Page 12
It has the special power resume function. In the case of power failure
or the power plug is loose during washing, the machine can save
the running program, and resume the program after the power
supply is recovered. You do not need to set the program again.