Husqvarna YTH2242 TF User Manual
Page 35
35
KEY PART
NO.
NO.
DESCRIPTION
1
- - - - - -
Engine Briggs Model No. 40H777-1421-B1
2
532 14 97-23
Muffler
9
532 19 43-20
Keeper Belt Engine
11
532 40 00-08
Clutch Electric
12
532 40 50-97
Pulley Engine
15
532 42 28-04
Tank Fuel
18
532 43 02-17
Cap
20
532 42 35-02
Control Throttle
21
532 41 63-58
Screw #10 x .750 BOS Thread
28
532 14 21-58
Fuel Line
29
532 13 71-80
Spark Arrester Kit
37
532 12 34-87
Clamp Hose
41
532 12 61-97
Washer 1-1/2 OD x 15/32 ID x .250
42
810 04 07-00
Washer Lock 7/16
45
873 51 04-00
Nut Keps Hex 1/4-20 unc
62
532 43 40-17
Heat Shield
69
532 16 53-91
Gasket
70
532 15 99-55
Tube Exhaust
71
532 16 05-89
Exhaust Tube
79
532 18 39-06
Screw Socket HP 5/16-18 x 1
84
817 06 06-20
Screw 3/8-16 x 1-1/4
85
532 17 39-37
Bolt Hex 7/16-20 x 4 x Gr. 5-1.5 Thr
87
537 17 18-77
Bolt 5/16-18 unc x 3/4 w/Sems
90
817 00 06-16
Screw 3/8-16 x 1
91
532 18 74-95
Bushing 1.375 OD
117
532 42 08-28
Valve Fuel Reserve
TRACTOR - MODEL NO. YTH2242 TF (96041022400), PRODUCT NO. 960 41 02-24
ENGINE
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm
Engine Power Rating Information
The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive En-
gineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and
corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower values
are derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among other things, ambient operat-
ing conditions and engine-to-engine variability. Given both the wide array of products on which engines are placed and
the variety of environmental issues applicable to operating the equipment, the gas engine will not develop the rated gross
power when used in a given piece of power equipment (actual “on-site” or net power). This difference is due to a variety
of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.),
application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine variability.
Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this
Series engine.