Hitachi DH 30PC - Manual (Page 9)

9
English
Stopper
Housing
Trigger
Set Screw
(Under the Tail Cover)
Tail Cover
Brush Cap
(Inside the Tail Cover)
Drill Bit
Nameplate
Side Handle
Grip
Change Lever
Handle
FUNCTIONAL DESCRIPTION
NOTE:
The information contained in this Instruction Manual is designed to assist you
in the safe operation and maintenance of the power tool.
NEVER operate, or attempt any maintenance on the tool unless you have first
read and understood all safety instructions contained in this manual.
Some illustrations in this Instruction Manual may show details or attachments
that differ from those on your own power tool.
NAME OF PARTS
Fig. 1
SPECIFICATIONS
Model DH30PB DH30PC
Motor Single-Phase, Series Commutator Motor
Power Source Single-Phase, 120V 60Hz
Current 7.4A
Capacity Concrete: 5/32" – 1-3/16" (4mm – 30mm)
Steel:
1/2"(13mm)
Wood: 1-1/4" (32mm)
No-Load Speed 0 – 850/min.
Full-load Impact Rate 0 – 3700/min.
Weight 10.4 lbs (4.7 kg) 10.6 lbs (4.8 kg)