Hitachi DH 24PD - Manual (Page 19)

19
ACCESSORIES
WARNING: Accessories for this power tool are mentioned in this Instruction
Manual.
The use of any other attachment or accessory can be dangerous
and could cause injury or mechanical damage.
NOTE:
Accessories are subject to change without any obligation on the part of the HITACHI.
STANDARD ACCESSORIES
(1)Case (Molded plastic) (Code No. 302211) ............................................................... 1
(2)Side Handle (Code No. 303659) ............................................................................... 1
(3)Dust-collecting Adaptor (Code No. 302074) ........................................................... 1
(4)Dust Bag (Code No. 302048) .................................................................................... 1
[Number (3) and (4) refer to use on concrete]
(5)Cap (Code No. 302374) ............................................................................................. 1
(1) Drill Bit (Slender
Shaft)
(2) Adaptor for slender shaft
(SDS-plus shank)
OPTIONAL ACCESSORIES ........... sold separately
1. Drilling anchor holes (Rotation + Striking)
⅜ Drill Bit (Slender shaft)
(1) Drill Bit (Slender Shaft)
(2) Adaptor for
Slender Shaft
Outer diameter Effective Length Overall Length Code No. Code No.
1/8" 1-25/32" 3-35/64"
306369
(3.4mm) (45mm) (90mm)
306370
9/64" 1-25/32" 3-35/64"
306368
(3.5mm) (45mm) (90mm)
⅜ Drill Bit (Taper shank) and taper shank adaptor
(1) Drill Bit (Taper Shank)
(2) Taper Shank Adaptor
(SDS-plus shank)
Cotter (Code No. 944477)